Country | USA | German | British | Japan | China | Australia |
Standard | ASTM A29 | DIN 17200 | BS 970 | JIS G4105 | GB/T 3077 | AS1444 |
Grades | 4140 | 1.7225 / 42CrMo4 | 42CrMo4 | SCM440 | 42CrMo | 4140 |
Standard | Grade | C | Mn | P | S | Si | Cr | Mo |
ASTM A29 | 4140 | 0.38-0.43 | 0.75-1.00 | 0.035 max | 0.040 max | 0.15-0.35 | 0.80-0.90 | 0.15-0.25 |
EN 10250 | 42CrMo4 / 1.7224 | 0.38-0.45 | 0.60-0.90 | 0.035 max | 0.035 max | 0.40 max | 0.90-1.2 | 0.15-0.30 |
JIS G4103 | SCM440 | 0.38-0.43 | 0.60-0.85 | 0.030 max | 0.030 max | 0.15-0.35 | 0.90-1.2 | 0.15-0.30 |
BS 970 | EN 19 / 708M40 | 0.35-0.45 | 0.50-0.80 | 0.035 max | 0.035 max | 0.10-0.35 | 0.90-1.4 | 0.20-0.40 |
AISI 4140 / EN19 Steel is a 1% chromium-molybdenum medium harden capability fundamental cause excessive tensile metal. It is pre-hardened and tempered and can be additional surface hardened by flame or induction hardening and by means of nitriding.
STEEL PROPERTIES
APPLICATION
ASTM alloy 4140 steel bar, flat or plate material can be utilized for as wide variety of applications where greater toughness and wear resistance is required over lower carbon grades. The applications of 4140 steel includes components, adapters, strippers, holder blocks, mould bases, ejectors, backup and support tooling, fixtures, jigs, moulds, cams, drill collars, axle shafts, bolts, crank shafts, stubs, couplings, reamer bodies, axles, shafting, piston rods, rams, hydraulic machinery shafts, gears, sprockets, gear racks, chain links, spindles, tool bodies, tool holders, tie rods, connection rods, chuck bodies, collets, conveyor pins and rolls, ejector pins, forks, gears, guide rods, hydraulic shafts and parts, lathe spindles, logging parts, milling spindles, motor shafts, nuts, pinch bars, pinions, pump shafts, boring bars, tracks, slides, wear strips or parts, forming dies, brake dies, trim dies, bolsters, machinery parts and components etc.
PHYSICAL PROPERTIES
Thermal Conductivity at °C | W / (m*K) |
20 | 42 |
350 | 42.2 |
700 | 42.4 |
HEAT TREATMENT
Soft Annealing °C | 680-780 |
Cooling | Furnace |
Hardness HB | max. 241 |
Stress-relief Annealing °C | 550-600 |
SIZE RANGE
ROUNDS – 6 to 600 MM DIA
SQUARES – 32 to 155 MM
FLATS -THICKNESS -15 to 105 MM | WIDTH – 40 to 405 MM
PIPE SIZES ALSO AVAILABLE FOR BOREWELL DTH HAMMER PARTS.
STOCKING PARTNERS
We keep the materials from China and India.